NI Counter Pulse Element

Summary ¶

	NI Counter Pulse
Info
Category:	Communication		AddIn:	AddIn_NI
Creator:	OkazoLab		Scope:	Parent event
Owns Snippets:	None		Usage:	Snippets

Properties ¶

Name	Description	Constraints	Type	On runtime change
Settings
NI Counter Channel	Defines the selected counter channel on the NI board	Design Time..	String
Working Mode	Defines a working mode for the element	Design Time..	stNIPo..
Output
Is Idle Low	Defines the idle state (low or high) for the generated pulses	Normal..	Boolean
Preface Duration	Defines the duration (ms) of the guarantied zero preface interval for the TTL or Pulse signals. Increase the preface duration marginally, if your recording hardware does not detect port signals. Note that a non-zero preface delays the onset of the actual signal.	Normal..	Double
Pulse Duration	Duration of a single output pulse in ms. The value is applied only if the Pulse signal profile is selected	Normal..	UInt64
Interpulse Duration	Defines a duration of the inter-pulse interval in ms. The value is applied only if the Pulse  signal profile is selected	Normal..	clTime
Pulse Number	Defines a number of pulses in the pulse train. The value is applied only if the Pulse signal profile is selected	Normal..	Int32
Send Output Now	Runtime action initiating an instant output communication through the port. Call this action in snippets by 'SendNow=true;', but only if the element works in the 'Manual I/O' mode.	Runtime Command..	Boolean
Runtime Status
Triggering Time	Indicates the local event time of the last element triggering. Triggering occurs only in the 'Input Detection' working mode.	Status..	clTime
Control
Is Enabled	If set to false the element is completely omitted when the experiment is run	Design Time..	Boolean
Title	Title of the element	Design Time..	String

¶

Description ¶

Snapshots ¶

Snapshot 1

Snapshot 2

Practical Use ¶

Technique 1 ¶

1. Step 1
2. Step 2
   ...
   === Technique 2 ===
3. Step 1
4. Step 2
   ...
   
   
   

    // Check the trial outcome. Result and RT just other user variables
   
   // insert code snippet here..
   
   

              
   ...
   == Notes ==
   ...
5. Insert Notes here..
6. Insert Notes here..
   

Description ¶

Snapshots ¶

Snapshot 1

Snapshot 2

Practical Use ¶

Technique 1 ¶

1. Step 1
2. Step 2
   

Technique 2 ¶

1. Step 1
2. Step 2
   

 // Check the trial outcome. Result and RT just other user variables
// insert code snippet here..

Notes ¶

• Insert Notes here..
• Insert Notes here..