Welcome Guest, you are in: <root>Elements • Login

Page History: Wave Player Element

Compare Page Revisions

53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Current 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

« Older Revision - Back to Page History - Newer Revision »

Page Revision: 2012/05/21 16:08

Wave Player element is capable of playing audio clips in the Waveform Audio File Format (WAV) with high temporal accuracy.

Table of Contents [Hide/Show] Description When to use the Wave Player element Stimulus Set Practical Use Playback modes    Single playback on event onset    Looped playback on event onset    Manual mode Triggering at the end of the playback Notes Properties     Generic properties

Description ¶

Wave Player is a default element in EventIDE for delivering audio stimuli stored in the Wave format. The element is recommended for modern sound cards on Vista and Windows 7 OS system, when high temporal accuracy of audio playback is required. For Windows XP and old sound cards the Direct Sound element may produce more accurate results.

The Wave Player element allows to choose one of four audio playback API: DirectSound, WaveOut (also known asWaveform Audio API), ASIO and WASAPI.

In the most cases, WSAPI in the exclusive mode delivers the best temporal accuracy and fidelity of audio playback. (for example, the mid-range Creative SB X-Fi Titanium Professional card, used in Windows 7, allows to start a playback just in 2ms after onset of the parent event)

The Wave Player element allows selection of the output sound device when multiple sound cards installed on a computer.

For some professional sound cards another low-level sound API,Audio Stream Input/Output ASIO, can be recommended. Using ASIO API and compatible sound hardware and drivers (the last two are essential) may also help to achieve perfect temporal precision and fidelity.

Wave Player element supports the majority of resolutions and encodings used in the Wave format. The element automatically converts input wave clips into uncompressed PCM data streams before a playback. Since the conversion takes some time, using the uncompressed PCM wave clips is recommended for faster processing of audio stimuli.

When to use the Wave Player element ¶

EventIDE provides several elements for delivering auditory stimuli. The audio elements have similar functionality and a choice depends on design demands and the used sound hardware. A guidance on selecting an audio element is available in Auditory Stimuli article.

In short, the Wave Player element is the simplest and most recommended audio element, especially if Windows Vista/7 system and modern sound card is used.

Stimulus Set ¶

The element can be easily adapted to make up an audio stimulus set that contains multiple audio clips. Then one of these clips can be selected to be played in the given trial. To make a stimulus set, load selected audio clips from Material Library directly into the element (e.g. by drag and drop). Then use the Item Index property to select an audio clip for playback. It's recommended to change the Item Index property before the onset of the parent event because preparing the clip for playback takes some time.

Practical Use ¶

1. Add a new Wave Player element into the selected event (where an audio has to be played).
2. Select the element in the Element panel, then its properties will appear in the Property panel at the right.
3. Load selected audio clips from the Material Library to the item list of the element and select the current clip via Item Index property.
4. Browse to the Hardware Settings group in the element properties and select Playback API and Sound Device in the corresponding properties.
5. Select a playback mode for the element in the Playback Setting group. The most common mode for presentation of auditory stimulus is "Single playback on onset of the parent event"
6. Test, if an audio is played by clicking over the Test Playback property.
7. Make sure that duration of the parent event is greater or equal to duration of the selected audio clip- an audio playback is always aborted on offset of the parent event.
   

Playback modes ¶

At runtime the element can work in 3 different playback modes, which define how playback process starts and stops. The mode has to be selected at design-time and cannot be changed. However, it's possible to use multiple elements working in different modes in parallel. The available modes are:

Single playback on event onset¶

In this mode the element starts to play an audio synchronously with activation of the parent event. The audio is played once. When the playback stops you can initiate a new one manually if the parent event is still active.

Looped playback on event onset¶

In this mode the element starts to play an audio synchronously with activation of the parent event and automatically restarts the playback as soon as the end of the audio clip is reached. This playback loop lasts until deactivation of the parent event.

Manual mode¶

In this mode the playback is controlled solely by element's IsPlaying property, which can be changed in snippets. If IsPlaying is set to true before onset of the parent event, the playback behaviour will be similar to 'Single playback on event onset' mode. If the parent event is active, the playback starts/stops on a change of the IsPlaying property. The Is Playing property automatically turns to false when the playback ends.

Triggering at the end of the playback ¶

Sometimes it's necessary to abort the parent event immediately after the playback has reached its end. Since the Wave Player element can contain multiple audio clips of different durations, the duration of the parent event can not set to fix value. The wave player elements offers an easy solution - it monitors the playback process and gets triggered at the end of each audio clip. Triggering causes a call of the OnTriggered snippet that can be used for custom user actions. In addition, the element has a boolean status property, called Is Triggered, which can be used directly to control the event flow.

Notes ¶

1. The Wave Player element is optimized to deliver the best timing accuracy and fidelity of audio playback. However, it's always recommended to measure empirically the timing of the actual playback when high accuracy is required. The measurements can be done with oscilloscope connected to the output of sound card and photo-diode on a monitor. Probing different settings of the element in such testing can help to achieve the optimal results.
2. Slightly better onset of the audio playback can be achieved if the element is placed at the top of the elements list in the parent event. Elements in the list get activated one by one on the onset of the parent event, so the top position in the list will minimize the onset delay.
   

Properties ¶

Generic properties ¶

Name	Description	Attributes	Value Type	Proxy Reflex
Hardware Settings
Playback API	Defines API for the audio playback. WASAPI is not supported in Windows XP but is recommended by default for Windows Vista/7. ASIO API requires appropriate drivers.	Enum List	Design Time..
Sound Device	Defines a sound device for the audio playback, when multiple devices are available in the system. Different playback API return their own device list for selection.	Enum List	Design Time..
Share Mode	Defines whether the selected sound device will be used in the shared or exclusive mode. This setting is relevant only when WASAPI is chosen. The exclusive mode greatly improves timing accuracy of audio playback and is recommended for stimulus presentation. As a drawback, only one sound can be played per time in the exclusive mode.	Enum List	Design Time..
Is Mixing	If true, the ASIO engine will be able to play multiple audios simultaneously. However, it may increase the playback latencies.		Boolean
Playback mode	Determines the playback mode for the element. If the property is set to None, the playback has to be initiated manually, otherwise it is synchronized with activation of the parent event.		Object
Monitor Playback	Indicates if the element triggers at the end of the each playback and records its start and end times.	D	Boolean
Clip Info	Information about the sound buffer created for the currently selected audio clip. Click to expand all fields.	D	stASIOBufferInfo
Playback
Volume	Volume, from ground (0) to full (100), of the playback of a wave audio		Double
Balance	Stereophonic balance, left (-100) to right (100), of the audio clip.	D,R	Int32
Start position	Defines the start position of the audio playback in percentages (0..100) to the total duration of the currently selected audio clip.	D,R	Double
Position	The current playing position (percentages, 0..100, to the total duration) of the audio. Changes are accepted only if the audio is playing at runtime.	D,R	Double
Runtime info
Start Time	If the playback triggering is on, indicates the actual event time when the last playback has started.	R, Read-Only	UInt64
End Time	If the playback triggering is on, indicates the actual event time when the last playback has reached its end.	R, Read-Only	UInt64
Is triggered	If the playback triggering is on, indicates that the element has been triggered at least once since the parent event is active.	R, Read-Only	Boolean

+=== Properties inherited from clLibraryElement ===

Name	Description	Constraints	Value Type	Upon Runtime Change
Material List
Selected Index	Defines the index of the active item in the material list of the element.		Int32	A change causes the current item to be reloaded and an update of the element.
Selected Item	Defines the name of the active item in the material list of the element. The name matches to a name of item in the Material Library		String	A change causes the current item to be reloaded and an update of the element.
Item Count	Returns the total number of items in the material list of the element.	Status..	Int32
Equalize RGB	The property is only available in the visual element. If the value is true, the average RGB pixel intensity will be equalized across all items in the material list. You can turn on this property, when you need to obtain a luminance-balanced set of visual stimulus.	Design Time..	Boolean

+=== Properties inherited from clElement === Inherited properties of clElement

Name	Description	Constraints	Value Type	Upon Change
Control
Is Enabled	If set to false the element is completely omitted when the experiment is run.	Design Time..	Boolean
Title	Title of the element.	Design Time..	String